908.42MHz Z-wave AC IR Extender ZXT-120

The ZXT-120 is a z-wave to IR extender for air-conditioner (AC),it works with any z-wave compliant gateway or controller.

Product:

908.42MHz Z-wave AC IR Extender ZXT-120  

Model:

ZXT-120

Introduction:

The ZXT-120 is a z-wave to IR extender for air-conditioner (AC),It works with any z-wave compliant gateway or controller by translating z-wave thermostat commands to AC IR control code, User can select the IR code from the built-in code library of ZXT-120, or use learning function,by using z-wave configuration commands according to the parameter table. ZXT-120 is also with built-in temperature sensor which allows gateway or controller to get the current room temperature.

ZXT-120 can be configured as either "Frequently Listening Routing Slaves" or "Always Listening" node after exclusion process

 (before inclusion process).

ZXT-120 supports Network Wide Inclusion (NWI) and Explore Frames,It also supports z-wave networks with multiple gateways and controllers .Like every z-wave accessory ,user will need to include the ZXT-120 into their z-wave network using the primary controller .Then,the user can use either the primary controller or secondary controller to configure and setup the ZXT-120 using z-wave's configuration command class .Once the configuration and setup is complete ,the controller can use z-wave "Thermostat commands class" to control their IR-controlled air-conditioner through the ZXT-120

Controller and Gateway Requirements

The ZXT-120 can work with any z-wave compliant controller or gateway supporting the following z-wave commands

1.Configuration Command Class

2.Multilevel Sensor Command Class

3.Thermostat Command Class

Thermostat Mode Command ClassThermostat Fan Mode Command ClassThermostat Set-point Command Class

Real picture :